Protecting Your Outboard Motor: Finding the Right Waterproof Cover Size
If you own a boat with an outboard motor, protecting it from the elements during storage is one of the smartest investments you can make. An outboard motor cover shields your engine from rain, snow, wind, dust, and UV damage, which can extend its lifespan and reduce maintenance costs. The Explore Land Waterproof 600D Outboard Motor Cover 50-115 HP is a marine-grade option designed for this purpose, but like any motor cover, it only works if you choose the right size for your specific engine.
Why Motor Covers Matter More Than You Think
Outboard motors are expensive pieces of equipment constantly exposed to harsh conditions. Even during the off-season, when your boat sits idle, rain and moisture can corrode metal parts, degrade seals, and damage electrical connections. A quality cover creates a barrier that keeps your engine dry and protected for months at a time.
The Explore Land brand uses 600D marine-grade polyester with waterproof laminated undercoating, which is thick enough to handle outdoor storage without tearing easily. The material also features double stitching and seam sealing, both of which are practical features that prevent water from seeping through weak points where threads might otherwise allow moisture in.
The Horsepower Number Is Not Your Size Guide
Here's what catches most people out: the cover is labeled for 50-115 HP motors, but horsepower alone does not determine whether it will fit your engine. Two outboard motors with the same horsepower can have completely different physical dimensions depending on their design, brand, and model year.
The actual cover dimensions are 26 inches long, 22 inches wide, and 24 inches tall. Before you buy, you need to measure your own motor with a tape measure. Check the length from the mounting bracket to the top of the engine cowling, the width across the widest part of the motor head, and the height from bottom to top. If your motor is close to or slightly smaller than these measurements, the cover should fit. If it's noticeably larger in any direction, it won't provide proper coverage.
The 50-115 HP rating is a general guide that covers most Honda, Yamaha, Mercury, Suzuki, Tohatsu, Evinrude, and Hangkai motors in that power range, but it's not a guarantee. Measure first, always.
What Makes This Cover Practical for Long-Term Storage
Beyond the basic waterproof material, a few design features make the Explore Land cover easier to use than a simple tarp. The quick-release buckle straps on the front allow you to install and remove the cover without wrestling with complicated fasteners. Heavy-duty elastic cords around the base pull tight to create a snug fit that won't slip or blow off in wind.
There are also two click-close straps at the back corners if you want to lock the cover to a cable for extra security in windy locations. For long-term storage, an air vent on the back side helps prevent moisture buildup inside the cover, which can be just as damaging as moisture from outside. Good air circulation prevents condensation and keeps the engine dry throughout the off-season.
Installation and Care
Installing a motor cover is straightforward. Clean your motor first so debris doesn't scratch it under the cover. Slip the cover over the engine cowling and adjust the elastic cords and straps for a secure fit. The quick-release buckles mean you can remove it just as easily when you're ready to use your boat again.
To keep your cover in good condition, rinse it with fresh water occasionally to remove salt spray or dust, then let it air dry before storing. The 600D polyester is durable enough for years of use if cared for properly. Store the cover in a dry place during boating season so it's ready when you need it again.
Taking time to measure your motor and choose the right size ensures that your Explore Land Waterproof 600D Outboard Motor Cover 50-115 HP actually protects your engine instead of leaving gaps where water can creep in. That small effort upfront makes all the difference in keeping your motor safe through off-season storage.
The product in this guide: Explore Land Waterproof 600D Outboard Motor Cover 50-115 HP, Tan


Leave a comment
Please note, comments need to be approved before they are published.